News & Articles

News & Articles

Tips for Set-Up Area Preparation and Maintenance of CarCapsule and ShowCase

Tips for Set-Up Area Preparation and Maintenance of CarCapsule and ShowCase

22nd Oct 2015

smiley-face-with-thumbs-up.jpg

So, you just got your new CarCapsule or ShowCase, and are wondering if there are tips for preparing the area where it will be set up. Or maybe you’ve had your capsule for a while, and want to be sure you are keeping it properly maintained. Well, this article is for you.

Before Setting-Up Your CarCapsule or ShowCase

  • While you can set-up on dirt or gravel, be sure there are no sharp rocks that could wear through the floor over time
  • Make sure there are no holes in the set-up surface with edges that could wear through the floor
  • Some owners concerned with coarse surfaces put an additional tarp on the ground for added protection
  • With Indoor models placed in structures with a slanted floor – some owners prefer to first put down plywood to make the parking surface more level
  • If the set-up surface has really large or coarse gravel we suggest a placing a plank underneath the zipper where the tires track. This avoids grinding the zipper into the gravel, thereby avoiding subsequent damage to the zipper.

Maintenance Tips

  • Clean the Evaporative Storage Technology fan filters every few months (and more frequently in dusty environments) with dawn dishwashing soap. Rinse thoroughly and allow to air dry.
  • Use a car duster to dust the top and sides off.
  • Wash with mild soapy water. Car wash works well.
  • With Outdoor models brush snow off the top after 4 or so inches have accumulated
  • Also with Outdoor models be sure accumulated snow, leaves, etc. do not block fans
  • Periodically check fans and power adapters to ensure proper operation

With proper attention to set-up procedure and maintenance your capsule will protect your vehicle for a long while.