Step 1: Lay down & Roll Over
Unroll your CarCapsule™ & spread out flat. Unzip the top clear PVC from the basemat & fold back toward the blue air intake panel. Pull the vehicle on to the basemat leaving equal distance on either side.
Step 2: Cover & Zip
Velcro the fan panel to the blue air intake panel & run your power supply cord through the basemat in the hole provided. Fold the top clear PVC over the vehicle. Zip the top clear PVC to the basemat.
Step 3: Plug in & inflate
Plug the fan into a wall outlet and the Bubble will inflate in 7-10 minutes. Once it is fully inflated, place the filter on the blue air intake panel.
Click below for step-by-step instruction:
CarCapsule Setup Tips:
• The first time out of the box, inflate the capsule without the vehicle in it to work the wrinkles out.
• If the temperature is below 50 degrees, open the CarCapsule™ box and let sit at room temperature for 24 hours.
• If you’re using the CarCapsule™ in extremely cold climates, inflate it in a warm area to help the PVC become pliable.
• Keep the air filter clean by hand washing it in warm water with mild dish soap.
• If your CarCapsule™ gets dusty you can use a car duster.
• If you CarCapsule™ become dirty or stained, use warm water and mild dish soap to clean. Rinse thoroughly.
• When not in use, store the CarCapsule™ up off the floor in a dry, rodent free place.
• Leave your windows all the way or half-way down.
• Leave your convertible top up or unlatched to preserve the weather stripping.
• DO NOT use another car cover inside the CarCapsule™. This will only trap moisture.
• DO NOT place any source of heat inside the capsule, not even a light bulb