18' Signature Series CarCapsule Indoor w/Road Emblazoned Floor & Intellicharger Included (Patent Pending) BACKORDER ETA 2-15-2025

18 Ft. Indoor Signature Series CarCapsule – CS18F

Six reasons to buy the Signature Series CarCapsule

1. The Base mat looks like carbon fiber with a road design and is almost twice as thick as our original model.
2. Clear PVC is over 25% thicker than the original and what we use on our ShowCase models.
3. The clear PVC is glass-like and much clearer than the original.
4. The welds are hot air welds and are almost invisible compared to the original RF weld. 
5. We use a larger fan because we need to inflate thicker PVC, which means more air changes per hour.
6. Includes the amazing IntelliCharge, which fully maintains your battery and runs our 12v fan. If the power goes out, it will automatically switch the fan load to your battery and revert when power resumes. It will then charge your battery up to full capacity and has a dual surge protector built in for added protection!

The Patent Pending Indoor Signature Series CarCapsule is a 24/7-365 days a year, vehicle storage solution. The CarCapsule™ protects your treasured vehicle from dust, dirt, dings, corrosion, mildew, musty odors, and pests while presenting it in a show quality display.  It’s a problem solver!

Designed with the serious car, or truck enthusiast in mind as a solution for maintaining that “showroom shine” all year-round, the CarCapsule; or “bubble”, as it’s known; provides an easy to use dust and dirt free enclosure for your prized car, or truck.  

Easy as 1-2-3

Once your car is positioned on the basemat; attach the fan, zip it up, and plug it in. No assembly required. The washable charcoal filter and High CFM Fan will keep dust, dirt, and insects out, maintaining a pristine environment inside your Indoor CarCapsule for years to come.

Setup time is about 15 minutes.  The CarCapsule comes in 16, 18 & 20 Ft. lengths.

CS18F Indoor Signature Series CarCapsule Features:

• Overall Size 18' - 216"x78"x68" (Length x Width x Height)
• 0.35mm clear PVC top cover.
• 0.70mm basemat is mildew, abrasion and flame resistant.
• Heavy Duty Basemat Impervious to oil, gas, and antifreeze.
• Rust free;100% Nylon “self-healing” coil zippers.
• No metal parts inside! No metal frame! No bare metal! 
• Fan: 190 CFM @ 4200 RPM, dual ball bearing, for continuously filtered airflow.
• 12 Volt, 1.5A power transformer.
• Includes fan, power supply, and washable charcoal filter.
• 1-year warranty.
• Weight: 64 lbs.